Moline Bearing
1-3/16 SPLIT E1000 CARTRIDGE
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
Split E1000·Cartridge

1-3/16 SPLIT E1000 CARTRIDGE

19373103

The 1 3⁄16" Split E1000 Cartridge Bearing is Moline Bearing Company part 19373103: a tapered roller bearing cartridge with a standard V-Guard contact seal and a double collar set screw locking insert. Maximum speed 3,800 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Made, machined & assembled in the USA.
  • Shipped Ready to Install with Premium Timken inserts.
  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
19373103
Series
Split E1000
Housing Type
Cartridge
Shaft Size
1 3⁄16" (1.1875″ / 30.16 mm)
Weight
3 lb
Insert Number
NPE08118DEE-401C4
Download CADPDF Catalog
0° - 250°
3800
2.75
Width (B)
1.88
Cartridge Ridge Width (C)
0.56
2.637
2 1⁄4

1-3/16 SPLIT E1000 CARTRIDGE

The 1 3⁄16" Split E1000 Cartridge Bearing is Moline Bearing Company part 19373103: a tapered roller bearing cartridge. It is fitted with a standard V-Guard contact seal and a double collar, set screw locking insert.

It is the replaceable solid cartridge from Moline's Split E1000 units: a genuine Timken® Enhanced DEE tapered roller insert, case-hardened and made from vacuum-degassed steel, in its own cartridge, so a worn bearing is swapped without removing the split housing from the shaft. Split E1000 units are made, machined and assembled in the USA.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

Maximum speed is 3,800 rpm with the standard V-Guard contact seal fitted, and the seal is rated for 0° to 250°F.

Mounting dimensions

  • Cartridge width: 1.88 in
  • Ridge diameter: 2.637 in
  • Ridge width: 0.56 in
  • Length through bore: 2.75 in
  • Shipping weight: 3 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Standard V-Guard Contact Seal. Moline's standard contact seal, with a lip riding on the insert to exclude contamination.
  • Double Collar. Two locking collars share the clamping load, improving holding power under reversing rotation or shock.
  • Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

Replacement parts

The bearing insert is NPE08118DEE-401C4.

Applications

It fits Moline's Split E1000 split housings for a 1 3⁄16" shaft. The split housing is for shafts that cannot be dismantled to feed a solid bearing on, in the same high radial and thrust load service as Type E: conveying, screening, cranes, mining, forestry, oil, gas, power generation and aggregate. It is dimensionally interchangeable with comparable Type E units, including Moline's Type E, ME2000 and ME3000 lines.