Moline Bearing
4 TYPE E 4-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT & LABYRINTH SEALS
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
Type E·4-Bolt Pillow Block

4 TYPE E 4-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT & LABYRINTH SEALS

19341400AL

The 4" Type E 4-Bolt Pillow Block Non-Expansion Bearing with Single Collar Insert and Labyrinth Seals is Moline Bearing Company part 19341400AL: a mounted tapered roller bearing with a balanced steel and Teflon labyrinth seal and a single collar set screw locking insert in a painted solid Class 30 cast iron housing. Dynamic load rating 26,900 lbf, maximum speed 1,530 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
19341400AL
Series
Type E
Housing Type
4-Bolt Pillow Block
Shaft Size
4" (4″ / 101.6 mm)
Expansion / Non-Expansion
Non-Expansion
Weight
65 lb
Insert Number
52400DE | NPE52400DEE-401C4
PDF Catalog
Static Load
154000 lbf
Dynamic Load
26900 lbf
Grease Fitting Size
1/8-27 NPT
Set Screw Torque
1325 in-lbs
Radial Slip Resistance
22000 lbf
Open End Cap Part #
18601315
Closed End Cap Part #
18600315
Angular Misalignment (Degrees)
0.05
Product Family
Mounted Roller Bearing
Rolling Element
Tapered Roller
Housing Construction
Solid
Insert Material
Steel
Locking Style
Set Screw Locking
Lubrication Type
Lithium Complex Grease
Housing Material
Class 30 Cast Iron
Seal Type
Balanced Steel and Teflon Labyrinth Seal
Seal Type Material
Steel and Teflon
Seal Type Operating Range (F)
0° - 350°
Seal Type Maximum Speed (RPM)
1530
Housing Coating
Standard Painted
Collar Type
Single Collar
Type E 4-Bolt Pillow Block dimensional drawing
ALength Through Bore6 1⁄4
BHousing Base Length15 1⁄4
CHousing Base Width4 1⁄2
DBolt Hole Center to Center11 11⁄16
Min DBolt Hole Center to Center Minimum10 7⁄16
Max DBolt Hole Center to Center Maximum12 7⁄8
EBolt Spacing [Width]2 1⁄4
FBolt Diameter [Nominal]3⁄4
GBolt Hole Slot Length1 3/16
HHousing Base Height2 7⁄16
JOverall Housing Height8 1⁄2
LDrive Collar Outside Diameter [OD]5 3⁄4
MBase to Center Height4 1⁄4

Product Variants

4 TYPE E 4-BOLT PILLOW BLOCK WITH LABYRINTH SEALS
4 TYPE E 4-BOLT PILLOW BLOCK WITH LABYRINTH SEALS
19341400L
4"
4 TYPE E 4-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT
4 TYPE E 4-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT
19341400A
4"
4 TYPE E 4-BOLT PILLOW BLOCK
4 TYPE E 4-BOLT PILLOW BLOCK
19341400
4"

4 TYPE E 4-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT & LABYRINTH SEALS

The 4" Type E 4-Bolt Pillow Block Non-Expansion Bearing with Single Collar Insert and Labyrinth Seals is Moline Bearing Company part 19341400AL: a mounted tapered roller bearing in the non-expansion position. It is fitted with a balanced steel and Teflon labyrinth seal and a single collar, set screw locking insert, in a solid Class 30 cast iron housing with a standard painted finish.

It carries a genuine Timken® Enhanced DEE tapered roller insert: case-hardened rollers and races made from vacuum-degassed steel, with a double-extended inner race, rated for high radial and thrust loads and slight angular misalignment. The housing is machined to close tolerances, and the unit is made, machined and assembled in the USA.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The dynamic load rating is 26,900 lbf and the static load rating is 154,000 lbf. Maximum speed is 1,530 rpm with the balanced steel and Teflon labyrinth seal fitted, and the seal is rated for 0° to 350°F. The insert accepts up to 0.05° of angular misalignment. Set screws torque to 1,325 in-lbs, and the locking system holds 22,000 lbf of radial load before the insert slips on the shaft. The grease fitting is 1/8-27 NPT.

Mounting dimensions

  • Base to center height: 4 1⁄4 in
  • Bolt hole centers: 11 11⁄16 in (slots allow 10 7⁄16 to 12 7⁄8 in), for 3⁄4 in bolts
  • Bolt spacing across: 2 1⁄4 in
  • Housing base: 15 1⁄4 × 4 1⁄2 in
  • Overall height: 8 1⁄2 in
  • Length through bore: 6 1⁄4 in
  • Shipping weight: 65 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Non-Expansion. This position holds the shaft axially. Use one non-expansion bearing per shaft to locate it lengthwise.
  • Balanced Steel and Teflon Labyrinth Seal. A labyrinth seal combining steel with a Teflon element, adding chemical resistance and a wider temperature range to a non-contact design.
  • Single Collar. One locking collar secures the insert to the shaft. Standard for unidirectional rotation and steady loads.
  • Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

The same size is also built as 19341400L (double collar), 19341400 (double collar, standard V-Guard contact seal), 19341400A (standard V-Guard contact seal).

Replacement parts

The bearing insert is 52400DE or NPE52400DEE-401C4. Open end cap 18601315 and closed end cap 18600315 fit this housing.

Applications

Type E units are specified where radial loads, thrust loads or both are high and misalignment is minimal. Moline Bearing Company lists conveying, screening, cranes, mining, forestry, oil, gas, power generation and aggregate among the industries that run them. It is dimensionally interchangeable with comparable Type E units, including Moline's Split E1000, ME2000 and ME3000 lines.