Moline Bearing
40MM M2000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH DOUBLE COLLAR INSERT & LABYRINTH SEALS
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
M2000·2-Bolt Pillow Block

40MM M2000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH DOUBLE COLLAR INSERT & LABYRINTH SEALS

19221040DL

The 40 mm M2000 2-Bolt Pillow Block Non-Expansion Bearing with Double Collar Insert and Labyrinth Seals is Moline Bearing Company part 19221040DL: a mounted spherical roller bearing with a balanced steel and Teflon labyrinth seal and a double collar set screw locking insert in a painted solid Class 30 cast iron housing. Dynamic load rating 17,300 lbf, maximum speed 4,700 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
19221040DL
Series
M2000
Housing Type
2-Bolt Pillow Block
Shaft Size
40mm (1.5748″ / 40 mm)
Expansion / Non-Expansion
Non-Expansion
Weight
8.1 lb
Insert Number
SLA09-040
PDF Catalog
Static Load
19800 lbf
Dynamic Load
17300 lbf
Grease Fitting Size
1/8-27 NPT
Set Screw Torque
290 in-lbs
Radial Slip Resistance
2100 lbf
Angular Misalignment (Degrees)
1.5
Product Family
Mounted Roller Bearing
Rolling Element
Spherical Roller
Housing Construction
Solid
Insert Material
Steel
Locking Style
Set Screw Locking
Lubrication Type
Lithium Complex Grease
Housing Material
Class 30 Cast Iron
Seal Type
Balanced Steel and Teflon Labyrinth Seal
Seal Type Material
Steel and Teflon
Seal Type Operating Range (F)
0° - 350°
Seal Type Maximum Speed (RPM)
4700
Housing Coating
Standard Painted
Collar Type
Double Collar
M2000 2-Bolt Pillow Block dimensional drawing
AOverall Unit Width - Single Collar3
BHousing Base Length7 3⁄8
CHousing Base Width2 3⁄16
DBolt Hole Center to Center5 1⁄2
Min DBolt Hole Center to Center Minimum5 3⁄16
Max DBolt Hole Center to Center Maximum5 13⁄16
FBolt Diameter [Nominal]1⁄2
GBolt Hole Slot Length15⁄16
HHousing Base Height1 5⁄16
JOverall Housing Height4 1⁄4
LDrive Collar Outside Diameter [OD]2 5⁄8
MBase to Center Height2 1⁄8
NLength Through Bore - Single Collar2 7⁄8
NdLength Through Bore - Double Collarn/a

Product Variants

40MM M2000 2-BOLT PILLOW BLOCK NON-EXPANSION
40MM M2000 2-BOLT PILLOW BLOCK NON-EXPANSION
19221040
40mm
40MM M2000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH DOUBLE COLLAR INSERT
40MM M2000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH DOUBLE COLLAR INSERT
19221040D
40mm
40MM M2000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH DOUBLE COLLAR INSERT & GARTER SEALS
40MM M2000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH DOUBLE COLLAR INSERT & GARTER SEALS
19221040DG
40mm
40MM M2000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH LABYRINTH SEALS
40MM M2000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH LABYRINTH SEALS
19221040L
40mm
40MM M2000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH GARTER SEALS
40MM M2000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH GARTER SEALS
19221040G
40mm

40MM M2000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH DOUBLE COLLAR INSERT & LABYRINTH SEALS

The 40 mm M2000 2-Bolt Pillow Block Non-Expansion Bearing with Double Collar Insert and Labyrinth Seals is Moline Bearing Company part 19221040DL: a mounted spherical roller bearing in the non-expansion position. It is fitted with a balanced steel and Teflon labyrinth seal and a double collar, set screw locking insert, in a solid Class 30 cast iron housing with a standard painted finish.

It carries a genuine SKF or Timken spherical roller insert, which gives it high load capacity and the most misalignment tolerance of Moline's lines. M2000 housings are made in the USA, and the units are assembled here.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The dynamic load rating is 17,300 lbf and the static load rating is 19,800 lbf. Maximum speed is 4,700 rpm with the balanced steel and Teflon labyrinth seal fitted, and the seal is rated for 0° to 350°F. The insert accepts up to 1.5° of angular misalignment. Set screws torque to 290 in-lbs, and the locking system holds 2,100 lbf of radial load before the insert slips on the shaft. The grease fitting is 1/8-27 NPT.

Mounting dimensions

  • Base to center height: 2 1⁄8 in
  • Bolt hole centers: 5 1⁄2 in (slots allow 5 3⁄16 to 5 13⁄16 in), for 1⁄2 in bolts
  • Housing base: 7 3⁄8 × 2 3⁄16 in
  • Overall height: 4 1⁄4 in
  • Shipping weight: 8.1 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Non-Expansion. This position holds the shaft axially. Use one non-expansion bearing per shaft to locate it lengthwise. The matching expansion unit for this shaft size is 19121040DL.
  • Balanced Steel and Teflon Labyrinth Seal. A labyrinth seal combining steel with a Teflon element, adding chemical resistance and a wider temperature range to a non-contact design.
  • Double Collar. Two locking collars share the clamping load, improving holding power under reversing rotation or shock.
  • Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

The same size is also built as 19221040 (single collar, triple-lip contact seals), 19221040G (single collar, garter seals), 19221040L (single collar), 19221040D (triple-lip contact seals), 19221040DG (garter seals).

Replacement parts

The bearing insert is SLA09-040.

Applications

M2000 units are the choice where a high-capacity, self-aligning bearing is needed and shaft expansion or misalignment is expected. Moline Bearing Company lists conveying, screening, air handling, paper and forestry, and food processing among the industries that run them. It is directly interchangeable with other collar-mounted spherical roller bearings in single-piece housings, including Moline's M3000 line.