75MM M2000 4-BOLT FLANGE NON-EXPANSION WITH DOUBLE COLLAR INSERT & LABYRINTH SEALS

The 75 mm M2000 4-Bolt Flange Non-Expansion Bearing with Double Collar Insert and Labyrinth Seals is Moline Bearing Company part 19211075DL: a mounted spherical roller bearing in the non-expansion position. It is fitted with a balanced steel and Teflon labyrinth seal and a double collar, set screw locking insert, in a solid Class 30 cast iron housing with a standard painted finish.

It carries a genuine SKF or Timken spherical roller insert, which gives it high load capacity and the most misalignment tolerance of Moline's lines. M2000 housings are made in the USA, and the units are assembled here.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The dynamic load rating is 35,500 lbf and the static load rating is 46,800 lbf. Maximum speed is 2,800 rpm with the balanced steel and Teflon labyrinth seal fitted, and the seal is rated for 0° to 350°F. The insert accepts up to 1.5° of angular misalignment. Set screws torque to 620 in-lbs, and the locking system holds 4,200 lbf of radial load before the insert slips on the shaft. The grease fitting is 1/8-27 NPT.

Mounting dimensions

• Bolt hole centers: 5 9⁄16 in
• Bolt circle diameter: 7 7⁄8 in
• Bolt size: 3⁄4 in
• Flange: 7 1⁄4 × 7 1⁄4 in
• Height above mounting surface: 3 15⁄16 in
• Length through bore: 4 3⁄4 in
• Shipping weight: 25 lb

The full dimension table and the datasheet drawing are above.

This configuration

• Non-Expansion. This position holds the shaft axially. Use one non-expansion bearing per shaft to locate it lengthwise. The matching expansion unit for this shaft size is 19111075DL.
• Balanced Steel and Teflon Labyrinth Seal. A labyrinth seal combining steel with a Teflon element, adding chemical resistance and a wider temperature range to a non-contact design.
• Double Collar. Two locking collars share the clamping load, improving holding power under reversing rotation or shock.
• Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

The same size is also built as 19211075DG (garter seals), 19211075 (single collar, triple-lip contact seals), 19211075D (triple-lip contact seals), 19211075G (single collar, garter seals), 19211075L (single collar).

Replacement parts

The bearing insert is SLA15-075.

Applications

M2000 units are the choice where a high-capacity, self-aligning bearing is needed and shaft expansion or misalignment is expected. Moline Bearing Company lists conveying, screening, air handling, paper and forestry, and food processing among the industries that run them. It is directly interchangeable with other collar-mounted spherical roller bearings in single-piece housings, including Moline's M3000 line.