Moline Bearing
115MM M2000 4-BOLT PILLOW BLOCK EXPANSION WITH DOUBLE COLLAR INSERT & GARTER SEALS
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
M2000·4-Bolt Pillow Block

115MM M2000 4-BOLT PILLOW BLOCK EXPANSION WITH DOUBLE COLLAR INSERT & GARTER SEALS

19141115DG

The 115 mm M2000 4-Bolt Pillow Block Expansion Bearing with Double Collar Insert and Garter Seals is Moline Bearing Company part 19141115DG: a mounted spherical roller bearing with a spring loaded garter seal and a double collar set screw locking insert in a painted solid Class 30 cast iron housing. Dynamic load rating 91,700 lbf, maximum speed 700 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
19141115DG
Series
M2000
Housing Type
4-Bolt Pillow Block
Shaft Size
115mm (4.5276″ / 115 mm)
Expansion / Non-Expansion
Expansion
Weight
72 lb
Insert Number
SLAA22-115
PDF Catalog
Static Load
126000 lbf
Dynamic Load
91700 lbf
Grease Fitting Size
1/8-27 NPT
Set Screw Torque
1325 in-lbs
Radial Slip Resistance
11000 lbf
Angular Misalignment (Degrees)
1.5
Product Family
Mounted Roller Bearing
Rolling Element
Spherical Roller
Housing Construction
Solid
Insert Material
Steel
Locking Style
Set Screw Locking
Lubrication Type
Lithium Complex Grease
Housing Material
Class 30 Cast Iron
Seal Type
Spring Loaded Garter Seal
Seal Type Material
Nitrile
Seal Type Operating Range (F)
0° - 250°
Seal Type Maximum Speed (RPM)
700
Housing Coating
Standard Painted
Collar Type
Double Collar
M2000 4-Bolt Pillow Block dimensional drawing
AOverall Unit Width - Single Collar5 1⁄2
BHousing Base Length16 1⁄2
CHousing Base Width4 3⁄4
DBolt Hole Center to Center13 1⁄2
Min DBolt Hole Center to Center Minimum13
Max DBolt Hole Center to Center Maximum14
EBolt Spacing [Width]2 1⁄2
FBolt Diameter [Nominal]3⁄4
GBolt Hole Slot Length1 5⁄16
HHousing Base Height2 3⁄4
JOverall Housing Height9 1⁄2
LDrive Collar Outside Diameter [OD]6 1⁄8
MBase to Center Height4 3⁄4
NLength Through Bore - Single Collarn/a
NdLength Through Bore - Double Collar6 1⁄4

Product Variants

115MM M2000 4-BOLT PILLOW BLOCK EXPANSION WITH LABYRINTH SEALS
115MM M2000 4-BOLT PILLOW BLOCK EXPANSION WITH LABYRINTH SEALS
19141115L
115mm
115MM M2000 4-BOLT PILLOW BLOCK EXPANSION WITH DOUBLE COLLAR INSERT & LABYRINTH SEALS
115MM M2000 4-BOLT PILLOW BLOCK EXPANSION WITH DOUBLE COLLAR INSERT & LABYRINTH SEALS
19141115DL
115mm
115MM M2000 4-BOLT PILLOW BLOCK EXPANSION WITH GARTER SEALS
115MM M2000 4-BOLT PILLOW BLOCK EXPANSION WITH GARTER SEALS
19141115G
115mm
115MM M2000 4-BOLT PILLOW BLOCK EXPANSION
115MM M2000 4-BOLT PILLOW BLOCK EXPANSION
19141115
115mm
115MM M2000 4-BOLT PILLOW BLOCK EXPANSION WITH DOUBLE COLLAR INSERT
115MM M2000 4-BOLT PILLOW BLOCK EXPANSION WITH DOUBLE COLLAR INSERT
19141115D
115mm

115MM M2000 4-BOLT PILLOW BLOCK EXPANSION WITH DOUBLE COLLAR INSERT & GARTER SEALS

The 115 mm M2000 4-Bolt Pillow Block Expansion Bearing with Double Collar Insert and Garter Seals is Moline Bearing Company part 19141115DG: a mounted spherical roller bearing in the expansion position. It is fitted with a spring loaded garter seal and a double collar, set screw locking insert, in a solid Class 30 cast iron housing with a standard painted finish.

It carries a genuine SKF or Timken spherical roller insert, which gives it high load capacity and the most misalignment tolerance of Moline's lines. M2000 housings are made in the USA, and the units are assembled here.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The dynamic load rating is 91,700 lbf and the static load rating is 126,000 lbf. Maximum speed is 700 rpm with the spring loaded garter seal fitted, and the seal is rated for 0° to 250°F. The insert accepts up to 1.5° of angular misalignment. Set screws torque to 1,325 in-lbs, and the locking system holds 11,000 lbf of radial load before the insert slips on the shaft. The grease fitting is 1/8-27 NPT.

Mounting dimensions

  • Base to center height: 4 3⁄4 in
  • Bolt hole centers: 13 1⁄2 in (slots allow 13 to 14 in), for 3⁄4 in bolts
  • Bolt spacing across: 2 1⁄2 in
  • Housing base: 16 1⁄2 × 4 3⁄4 in
  • Overall height: 9 1⁄2 in
  • Length through bore: 6 1⁄4 in
  • Shipping weight: 72 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Expansion. This position lets the shaft move lengthwise as it heats and grows. Pair it with a non-expansion bearing at the other end. The matching non-expansion unit for this shaft size is 19241115DG.
  • Spring Loaded Garter Seal. A contact seal with a garter spring keeping constant lip pressure on the shaft, holding its seal as the lip wears.
  • Double Collar. Two locking collars share the clamping load, improving holding power under reversing rotation or shock.
  • Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

The same size is also built as 19141115 (single collar, triple-lip contact seals), 19141115G (single collar), 19141115L (single collar, labyrinth seals), 19141115D (triple-lip contact seals), 19141115DL (labyrinth seals).

Replacement parts

The bearing insert is SLAA22-115.

Applications

M2000 units are the choice where a high-capacity, self-aligning bearing is needed and shaft expansion or misalignment is expected. Moline Bearing Company lists conveying, screening, air handling, paper and forestry, and food processing among the industries that run them. It is directly interchangeable with other collar-mounted spherical roller bearings in single-piece housings, including Moline's M3000 line.