Moline Bearing
115MM SPLIT E1000 4-BOLT PILLOW BLOCK NON-EXPANSION WITH SINGLE COLLAR INSERT & LABYRINTH SEALS
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
Split E1000·4-Bolt Pillow Block

115MM SPLIT E1000 4-BOLT PILLOW BLOCK NON-EXPANSION WITH SINGLE COLLAR INSERT & LABYRINTH SEALS

49342115AL

The 115 mm Split E1000 4-Bolt Pillow Block Non-Expansion Bearing with Single Collar Insert and Labyrinth Seals is Moline Bearing Company part 49342115AL: a split-housing mounted tapered roller bearing with a balanced steel and Teflon labyrinth seal and a single collar set screw locking insert in a painted split 65-45-12 ductile iron housing. Dynamic load rating 33,000 lbf, maximum speed 1,360 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
49342115AL
Series
Split E1000
Housing Type
4-Bolt Pillow Block
Shaft Size
115mm (4.5276″ / 115 mm)
Expansion / Non-Expansion
Non-Expansion
Weight
153 lb
Insert Number
64453DE
Top Housing Number (Split)
11472407
Bottom Housing Number (Split)
11482407
PDF Catalog
Static Load
188400 lbf
Dynamic Load
33000 lbf
Grease Fitting Size
1/8-27 NPT
Set Screw Torque
1325 in-lbs
Radial Slip Resistance
27000 lbf
Open End Cap Part #
18601407
Closed End Cap Part #
18600407
Angular Misalignment (Degrees)
0.05
Product Family
Mounted Roller Bearing
Rolling Element
Tapered Roller
Housing Construction
Split
Insert Material
Steel
Locking Style
Set Screw Locking
Lubrication Type
Lithium Complex Grease
Housing Material
65-45-12 Ductile Iron
Seal Type
Balanced Steel and Teflon Labyrinth Seal
Seal Type Material
Metal
Seal Type Operating Range (F)
0° - 350°
Seal Type Maximum Speed (RPM)
1360
Housing Coating
Standard Painted
Collar Type
Single Collar
Split E1000 4-Bolt Pillow Block dimensional drawing
ALength Through Bore6.75
BHousing Base Length16 1⁄2
CHousing Base Width5 1⁄16
DBolt Hole Center to Center13 1⁄2
Min DBolt Hole Center to Center Minimum11 3⁄4
Max DBolt Hole Center to Center Maximum13 7⁄8
EBolt Spacing [Width]2 1⁄2
FBolt Diameter [Nominal]3⁄4
GBolt Hole Slot Length1 15⁄16
HHousing Base Height2 3⁄4
JOverall Housing Height9 13⁄16
LDrive Collar Outside Diameter [OD]6 1⁄4
MBase to Center Height4.75
PHousing Height Above Mounting Surface11 1⁄16
—Dimension EXP0.56

Product Variants

115MM SPLIT E1000 4-BOLT PILLOW BLOCK NON-EXPANSION WITH LABYRINTH SEALS
115MM SPLIT E1000 4-BOLT PILLOW BLOCK NON-EXPANSION WITH LABYRINTH SEALS
49342115L
115mm
115MM SPLIT E1000 4-BOLT PILLOW BLOCK NON-EXPANSION
115MM SPLIT E1000 4-BOLT PILLOW BLOCK NON-EXPANSION
49342115
115mm
115MM SPLIT E1000 4-BOLT PILLOW BLOCK NON-EXPANSION WITH SINGLE COLLAR INSERT
115MM SPLIT E1000 4-BOLT PILLOW BLOCK NON-EXPANSION WITH SINGLE COLLAR INSERT
49342115A
115mm

115MM SPLIT E1000 4-BOLT PILLOW BLOCK NON-EXPANSION WITH SINGLE COLLAR INSERT & LABYRINTH SEALS

The 115 mm Split E1000 4-Bolt Pillow Block Non-Expansion Bearing with Single Collar Insert and Labyrinth Seals is Moline Bearing Company part 49342115AL: a split-housing mounted tapered roller bearing in the non-expansion position. It is fitted with a balanced steel and Teflon labyrinth seal and a single collar, set screw locking insert, in a split 65-45-12 ductile iron housing with a standard painted finish.

It carries a genuine Timken® Enhanced DEE tapered roller insert in a replaceable solid cartridge, so the bearing can be swapped without removing or replacing the housing. The housing is 65-45-12 ductile iron, split so it can be fitted around a shaft in place. Split E1000 units are made, machined and assembled in the USA.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The dynamic load rating is 33,000 lbf and the static load rating is 188,400 lbf. Maximum speed is 1,360 rpm with the balanced steel and Teflon labyrinth seal fitted, and the seal is rated for 0° to 350°F. The insert accepts up to 0.05° of angular misalignment. Set screws torque to 1,325 in-lbs, and the locking system holds 27,000 lbf of radial load before the insert slips on the shaft. The grease fitting is 1/8-27 NPT.

Mounting dimensions

  • Base to center height: 4.75 in
  • Bolt hole centers: 13 1⁄2 in (slots allow 11 3⁄4 to 13 7⁄8 in), for 3⁄4 in bolts
  • Bolt spacing across: 2 1⁄2 in
  • Housing base: 16 1⁄2 × 5 1⁄16 in
  • Overall height: 9 13⁄16 in
  • Length through bore: 6.75 in
  • Shipping weight: 153 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Non-Expansion. This position holds the shaft axially. Use one non-expansion bearing per shaft to locate it lengthwise. The matching expansion unit for this shaft size is 39342115AL.
  • Balanced Steel and Teflon Labyrinth Seal. A labyrinth seal combining steel with a Teflon element, adding chemical resistance and a wider temperature range to a non-contact design.
  • Single Collar. One locking collar secures the insert to the shaft. Standard for unidirectional rotation and steady loads.
  • Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

The same size is also built as 49342115L (double collar), 49342115 (double collar, standard V-Guard contact seal), 49342115A (standard V-Guard contact seal).

Replacement parts

The bearing insert is 64453DE. Open end cap 18601407 and closed end cap 18600407 fit this housing.

Applications

The split housing is for shafts that cannot be dismantled to feed a solid bearing on, in the same high radial and thrust load service as Type E: conveying, screening, cranes, mining, forestry, oil, gas, power generation and aggregate. It is dimensionally interchangeable with comparable Type E units, including Moline's Type E, ME2000 and ME3000 lines.