Moline Bearing
35MM SPLIT E1000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH LABYRINTH SEALS
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
Split E1000·2-Bolt Pillow Block

35MM SPLIT E1000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH LABYRINTH SEALS

49322035L

The 35 mm Split E1000 2-Bolt Pillow Block Non-Expansion Bearing with Labyrinth Seals is Moline Bearing Company part 49322035L: a split-housing mounted tapered roller bearing with a balanced steel and Teflon labyrinth seal and a double collar set screw locking insert in a painted split 65-45-12 ductile iron housing. Dynamic load rating 6,100 lbf, maximum speed 3,820 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
49322035L
Series
Split E1000
Housing Type
2-Bolt Pillow Block
Shaft Size
35mm (1.3779″ / 35 mm)
Expansion / Non-Expansion
Non-Expansion
Weight
11 lb
Insert Number
NPE19138DEE-401C4
Top Housing Number (Split)
11272107
Bottom Housing Number (Split)
11282107
PDF Catalog
Static Load
26000 lbf
Dynamic Load
6100 lbf
Grease Fitting Size
1/8-27 NPT
Set Screw Torque
165 in-lbs
Radial Slip Resistance
5000 lbf
Open End Cap Part #
18621106
Closed End Cap Part #
18620107
Angular Misalignment (Degrees)
4
Product Family
Mounted Roller Bearing
Rolling Element
Tapered Roller
Housing Construction
Split
Insert Material
Steel
Locking Style
Set Screw Locking
Lubrication Type
Lithium Complex Grease
Housing Material
65-45-12 Ductile Iron
Seal Type
Balanced Steel and Teflon Labyrinth Seal
Seal Type Material
Metal
Seal Type Operating Range (F)
0° - 350°
Seal Type Maximum Speed (RPM)
3820
Housing Coating
Standard Painted
Collar Type
Double Collar
Split E1000 2-Bolt Pillow Block dimensional drawing
ALength Through Bore3
BHousing Base Length7 1⁄4
CHousing Base Width2 3⁄16
DBolt Hole Center to Center5 5⁄8
Min DBolt Hole Center to Center Minimum5 5⁄16
Max DBolt Hole Center to Center Maximum5 15⁄16
FBolt Diameter [Nominal]1⁄2
GBolt Hole Slot Length15⁄16
HHousing Base Height1 1⁄8
JOverall Housing Height4 3⁄16
LDrive Collar Outside Diameter [OD]2 1⁄2
MBase to Center Height1.88
PHousing Height Above Mounting Surface4 5⁄8
—Expansion Capability0.56

Product Variants

35MM SPLIT E1000 2-BOLT PILLOW BLOCK NON-EXPANSION
35MM SPLIT E1000 2-BOLT PILLOW BLOCK NON-EXPANSION
49322035
35mm
35MM SPLIT E1000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH SINGLE COLLAR INSERT & LABYRINTH SEALS
35MM SPLIT E1000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH SINGLE COLLAR INSERT & LABYRINTH SEALS
49322035AL
35mm
35MM SPLIT E1000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH SINGLE COLLAR INSERT
35MM SPLIT E1000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH SINGLE COLLAR INSERT
49322035A
35mm

35MM SPLIT E1000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH LABYRINTH SEALS

The 35 mm Split E1000 2-Bolt Pillow Block Non-Expansion Bearing with Labyrinth Seals is Moline Bearing Company part 49322035L: a split-housing mounted tapered roller bearing in the non-expansion position. It is fitted with a balanced steel and Teflon labyrinth seal and a double collar, set screw locking insert, in a split 65-45-12 ductile iron housing with a standard painted finish.

It carries a genuine Timken® Enhanced DEE tapered roller insert in a replaceable solid cartridge, so the bearing can be swapped without removing or replacing the housing. The housing is 65-45-12 ductile iron, split so it can be fitted around a shaft in place. Split E1000 units are made, machined and assembled in the USA.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The dynamic load rating is 6,100 lbf and the static load rating is 26,000 lbf. Maximum speed is 3,820 rpm with the balanced steel and Teflon labyrinth seal fitted, and the seal is rated for 0° to 350°F. The insert accepts up to 4° of angular misalignment. Set screws torque to 165 in-lbs, and the locking system holds 5,000 lbf of radial load before the insert slips on the shaft. The grease fitting is 1/8-27 NPT.

Mounting dimensions

  • Base to center height: 1.88 in
  • Bolt hole centers: 5 5⁄8 in (slots allow 5 5⁄16 to 5 15⁄16 in), for 1⁄2 in bolts
  • Housing base: 7 1⁄4 × 2 3⁄16 in
  • Overall height: 4 3⁄16 in
  • Length through bore: 3 in
  • Shipping weight: 11 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Non-Expansion. This position holds the shaft axially. Use one non-expansion bearing per shaft to locate it lengthwise. The matching expansion unit for this shaft size is 39322035L.
  • Balanced Steel and Teflon Labyrinth Seal. A labyrinth seal combining steel with a Teflon element, adding chemical resistance and a wider temperature range to a non-contact design.
  • Double Collar. Two locking collars share the clamping load, improving holding power under reversing rotation or shock.
  • Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

The same size is also built as 49322035 (standard V-Guard contact seal), 49322035A (single collar, standard V-Guard contact seal), 49322035AL (single collar).

Replacement parts

The bearing insert is NPE19138DEE-401C4. Open end cap 18621106 and closed end cap 18620107 fit this housing.

Applications

The split housing is for shafts that cannot be dismantled to feed a solid bearing on, in the same high radial and thrust load service as Type E: conveying, screening, cranes, mining, forestry, oil, gas, power generation and aggregate. It is dimensionally interchangeable with comparable Type E units, including Moline's Type E, ME2000 and ME3000 lines.