Moline Bearing
4-15/16 ME3000 4-BOLT PILLOW BLOCK NON-EXPANSION
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
ME3000·4-Bolt Pillow Block

4-15/16 ME3000 4-BOLT PILLOW BLOCK NON-EXPANSION

29741415

The 4 15⁄16" ME3000 4-Bolt Pillow Block Non-Expansion Bearing is Moline Bearing Company part 29741415: an Even-Lok™ mounted spherical roller bearing with Type E dimensions with a standard double lip contact seal and a single collar Even-Lok insert in a painted Class 30 cast iron housing. Dynamic load rating 170,300 lbf, maximum speed 1,550 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Made, machined & assembled in the USA.
  • Shipped Ready to Install with Premium Timken or SKF inserts.
  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
29741415
Series
ME3000
Housing Type
4-Bolt Pillow Block
Shaft Size
4 15⁄16" (4.9375″ / 125.41 mm)
Expansion / Non-Expansion
Non-Expansion
Weight
107 lb
Insert Number
ABSY 22226-415
Housing Number
11421415
PDF Catalog
Static Load
209000 lbf
Dynamic Load
170300 lbf
Grease Fitting Size
1/8-27 NPT
Set Screw Torque
1325 in-lbs
Open End Cap Part #
18621415
Closed End Cap Part #
18620415
Angular Misalignment (Degrees)
1.5
Product Family
Mounted Roller Bearing
Rolling Element
Spherical Roller
Insert Material
Steel
Locking Style
Even-Lok
Lubrication Type
Lithium Complex Grease
Housing Material
Class 30 Cast Iron
Seal Type
Standard Double Lip Contact Seal
Seal Type Material
Nitrile
Seal Type Operating Range (F)
0° - 250°
Seal Type Maximum Speed (RPM)
1550
Housing Coating
Standard Painted
Collar Type
Single Collar
ME3000 4-Bolt Pillow Block dimensional drawing
ALength Through Bore4 5⁄8
BHousing Base Length18 5⁄8
CHousing Base Width5 3⁄8
DBolt Hole Center to Center15 1⁄2
Min DBolt Hole Center to Center Minimum15
Max DBolt Hole Center to Center Maximum16
EBolt Spacing [Width]2 3⁄4
FBolt Diameter [Nominal]7⁄8
GBolt Hole Slot Length1 1⁄2
HHousing Base Height3
JOverall Housing Height11 1⁄8
MBase to Center Height5 1⁄2

Similar Products

4-15/16 ME3000 4-BOLT PILLOW BLOCK EXPANSION
4-15/16 ME3000 4-BOLT PILLOW BLOCK EXPANSION
29641415
4 15⁄16"
4-1/2 ME3000 4-BOLT PILLOW BLOCK EXPANSION
4-1/2 ME3000 4-BOLT PILLOW BLOCK EXPANSION
29641408
4 1/2"
4-1/2 ME3000 4-BOLT PILLOW BLOCK NON-EXPANSION
4-1/2 ME3000 4-BOLT PILLOW BLOCK NON-EXPANSION
29741408
4 1/2"
4-7/16 ME3000 4-BOLT PILLOW BLOCK EXPANSION
4-7/16 ME3000 4-BOLT PILLOW BLOCK EXPANSION
29641407
4 7/16"
4-7/16 ME3000 4-BOLT PILLOW BLOCK NON-EXPANSION WITH LABYRINTH SEALS
4-7/16 ME3000 4-BOLT PILLOW BLOCK NON-EXPANSION WITH LABYRINTH SEALS
29741407L
4 7/16"
4-7/16 ME3000 4-BOLT PILLOW BLOCK EXPANSION WITH LABYRINTH SEALS
4-7/16 ME3000 4-BOLT PILLOW BLOCK EXPANSION WITH LABYRINTH SEALS
29641407L
4 7/16"

4-15/16 ME3000 4-BOLT PILLOW BLOCK NON-EXPANSION

The 4 15⁄16" ME3000 4-Bolt Pillow Block Non-Expansion Bearing is Moline Bearing Company part 29741415: an Even-Lok™ mounted spherical roller bearing with Type E dimensions in the non-expansion position. It is fitted with a standard double lip contact seal and a single collar, Even-Lok insert, in a Class 30 cast iron housing with a standard painted finish.

It carries a genuine SKF® Explorer spherical roller insert and locks to the shaft with Moline's Even-Lok™ concentric system, which grips nearly 360° of the shaft instead of at set-screw points, reducing fretting and slippage. A Hex-L key for mounting and dismounting ships with it. ME3000 housings are made in the USA, and the units are assembled here.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The dynamic load rating is 170,300 lbf and the static load rating is 209,000 lbf. Maximum speed is 1,550 rpm with the standard double lip contact seal fitted, and the seal is rated for 0° to 250°F. The insert accepts up to 1.5° of angular misalignment. Set screws torque to 1,325 in-lbs. The grease fitting is 1/8-27 NPT.

Mounting dimensions

  • Base to center height: 5 1⁄2 in
  • Bolt hole centers: 15 1⁄2 in (slots allow 15 to 16 in), for 7⁄8 in bolts
  • Bolt spacing across: 2 3⁄4 in
  • Housing base: 18 5⁄8 × 5 3⁄8 in
  • Overall height: 11 1⁄8 in
  • Length through bore: 4 5⁄8 in
  • Shipping weight: 107 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Non-Expansion. This position holds the shaft axially. Use one non-expansion bearing per shaft to locate it lengthwise. The matching expansion unit for this shaft size is 29641415.
  • Standard Double Lip Contact Seal. Two lips in series, so the second continues to seal if the first is compromised. A step up in dirty conditions.
  • Single Collar. One locking collar secures the insert to the shaft. Standard for unidirectional rotation and steady loads.
  • Even-Lok. Moline's concentric locking system, which clamps the insert evenly around the shaft rather than at set-screw points. Improves concentricity and holding power versus set screws.

Replacement parts

The bearing insert is ABSY 22226-415, and the housing on its own is Moline Bearing Company part 11421415. Open end cap 18621415 and closed end cap 18620415 fit this housing.

Applications

ME3000 units are for Type E-footprint mounts where vibration, slippage or fretting corrosion would loosen a set-screw insert. Moline Bearing Company lists conveying, screening, air handling, industrial laundries and high-speed fans among the industries that run them. It is dimensionally interchangeable with competitive spherical roller bearing units in Type E dimensions, including Moline's Split E1000 and ME2000 lines.