Moline Bearing
110MM ME2000 4-BOLT PILLOW BLOCK NON-EXPANSION
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
ME2000·4-Bolt Pillow Block

110MM ME2000 4-BOLT PILLOW BLOCK NON-EXPANSION

29241110

The 110 mm ME2000 4-Bolt Pillow Block Non-Expansion Bearing is Moline Bearing Company part 29241110: a mounted spherical roller bearing with Type E dimensions with a standard triple lip contact seal and a single collar set screw locking insert in a painted solid Class 30 cast iron housing. Dynamic load rating 91,700 lbf, maximum speed 1,150 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Made, machined & assembled in the USA.
  • Shipped Ready to Install with Premium Timken or SKF inserts.
  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
29241110
Series
ME2000
Housing Type
4-Bolt Pillow Block
Shaft Size
110mm (4.3307″ / 110 mm)
Expansion / Non-Expansion
Non-Expansion
Weight
81 lb
Insert Number
SLAA22-110
Housing Number
11421407
Download CADPDF Catalog
Static Load
126000 lbf
Dynamic Load
91700 lbf
Grease Fitting Size
1/8-27 NPT
Set Screw Torque
1325 in-lbs
Radial Slip Resistance
11000 lbf
Angular Misalignment (Degrees)
1.5
Product Family
Mounted Roller Bearing
Rolling Element
Spherical Roller
Housing Construction
Solid
Insert Material
Steel
Locking Style
Set Screw Locking
Lubrication Type
Lithium Complex Grease
Housing Material
Class 30 Cast Iron
Seal Type
Standard Triple Lip Contact Seal
Seal Type Material
Nitrile
Seal Type Operating Range (F)
0° - 250°
Seal Type Maximum Speed (RPM)
1150
Housing Coating
Standard Painted
Collar Type
Single Collar
ME2000 4-Bolt Pillow Block dimensional drawing
AOverall Unit Width - Single Collar5 1⁄2
BHousing Base Length16 5⁄8
CHousing Base Width4 5⁄8
DBolt Hole Center to Center12 9/16
Min DBolt Hole Center to Center Minimum11 1/4
Max DBolt Hole Center to Center Maximum13 7/8
EBolt Spacing [Width]2 1⁄2
FBolt Diameter [Nominal]3⁄4
GBolt Hole Slot Length2 1/4
HHousing Base Height2 3⁄4
JOverall Housing Height9 1/2
LDrive Collar Outside Diameter [OD]6 1⁄8
MBase to Center Height4 3⁄4
NLength Through Bore - Single Collarn/a
NdLength Through Bore - Double Collar6 1⁄4

Product Variants

110MM ME2000 4-BOLT PILLOW BLOCK NON-EXPANSION WITH GARTER SEALS
110MM ME2000 4-BOLT PILLOW BLOCK NON-EXPANSION WITH GARTER SEALS
29241110G
110mm
110MM ME2000 4-BOLT PILLOW BLOCK NON-EXPANSION WITH LABYRINTH SEALS
110MM ME2000 4-BOLT PILLOW BLOCK NON-EXPANSION WITH LABYRINTH SEALS
29241110L
110mm
110MM ME2000 4-BOLT PILLOW BLOCK NON-EXPANSION DOUBLE COLLAR WITH GARTER SEALS
110MM ME2000 4-BOLT PILLOW BLOCK NON-EXPANSION DOUBLE COLLAR WITH GARTER SEALS
29241110DG
110mm

110MM ME2000 4-BOLT PILLOW BLOCK NON-EXPANSION

The 110 mm ME2000 4-Bolt Pillow Block Non-Expansion Bearing is Moline Bearing Company part 29241110: a mounted spherical roller bearing with Type E dimensions in the non-expansion position. It is fitted with a standard triple lip contact seal and a single collar, set screw locking insert, in a solid Class 30 cast iron housing with a standard painted finish.

It carries a genuine SKF or Timken spherical roller insert in a solid cast iron housing with an integrated center support, so it gives spherical-roller misalignment and expansion capability in a Type E footprint. ME2000 housings are made in the USA, and the units are assembled here.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The dynamic load rating is 91,700 lbf and the static load rating is 126,000 lbf. Maximum speed is 1,150 rpm with the standard triple lip contact seal fitted, and the seal is rated for 0° to 250°F. The insert accepts up to 1.5° of angular misalignment. Set screws torque to 1,325 in-lbs, and the locking system holds 11,000 lbf of radial load before the insert slips on the shaft. The grease fitting is 1/8-27 NPT.

Mounting dimensions

  • Base to center height: 4 3⁄4 in
  • Bolt hole centers: 12 9/16 in (slots allow 11 1/4 to 13 7/8 in), for 3⁄4 in bolts
  • Bolt spacing across: 2 1⁄2 in
  • Housing base: 16 5⁄8 × 4 5⁄8 in
  • Overall height: 9 1/2 in
  • Overall unit width: 5 1⁄2 in
  • Shipping weight: 81 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Non-Expansion. This position holds the shaft axially. Use one non-expansion bearing per shaft to locate it lengthwise. The matching expansion unit for this shaft size is 29141110.
  • Standard Triple Lip Contact Seal. Three lips in series for demanding contamination exclusion, at the cost of more running friction and heat.
  • Single Collar. One locking collar secures the insert to the shaft. Standard for unidirectional rotation and steady loads.
  • Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

The same size is also built as 29241110G (garter seals), 29241110L (labyrinth seals).

Replacement parts

The bearing insert is SLAA22-110, and the housing on its own is Moline Bearing Company part 11421407. Closed end cap 18620407 fits this housing.

Applications

ME2000 units are specified where a Type E footprint needs more misalignment or expansion capability. Moline Bearing Company lists conveying, screening, air handling, laundries, food processing, and paper and forestry among the industries that run them. It is dimensionally interchangeable with competitive spherical roller bearing units in Type E dimensions, including Moline's Split E1000 and ME3000 lines.