Moline Bearing
110MM ME2000 4-BOLT FLANGE NON-EXPANSION
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
ME2000·4-Bolt Flange

110MM ME2000 4-BOLT FLANGE NON-EXPANSION

29211110

The 110 mm ME2000 4-Bolt Flange Non-Expansion Bearing is Moline Bearing Company part 29211110: a mounted spherical roller bearing with Type E dimensions with a standard triple lip contact seal and a single collar set screw locking insert in a painted solid Class 30 cast iron housing. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
29211110
Series
ME2000
Housing Type
4-Bolt Flange
Shaft Size
110mm (4.3307″ / 110 mm)
Expansion / Non-Expansion
Non-Expansion
Weight
87 lb
Insert Number
SLAA22-110
PDF Catalog
Grease Fitting Size
1/8-27 NPT
Set Screw Torque
1325 in-lbs
Angular Misalignment (Degrees)
1.5
Product Family
Mounted Roller Bearing
Rolling Element
Spherical Roller
Housing Construction
Solid
Insert Material
Steel
Locking Style
Set Screw Locking
Lubrication Type
Lithium Complex Grease
Housing Material
Class 30 Cast Iron
Seal Type
Standard Triple Lip Contact Seal
Seal Type Material
Nitrile
Seal Type Operating Range (F)
0° - 250°
Housing Coating
Standard Painted
Collar Type
Single Collar

Product Variants

110MM ME2000 4-BOLT FLANGE NON-EXPANSION WITH GARTER SEALS
110MM ME2000 4-BOLT FLANGE NON-EXPANSION WITH GARTER SEALS
29211110G
110mm
110MM ME2000 4-BOLT FLANGE NON-EXPANSION DOUBLE COLLAR WITH GARTER SEALS
110MM ME2000 4-BOLT FLANGE NON-EXPANSION DOUBLE COLLAR WITH GARTER SEALS
29211110DG
110mm

110MM ME2000 4-BOLT FLANGE NON-EXPANSION

The 110 mm ME2000 4-Bolt Flange Non-Expansion Bearing is Moline Bearing Company part 29211110: a mounted spherical roller bearing with Type E dimensions in the non-expansion position. It is fitted with a standard triple lip contact seal and a single collar, set screw locking insert, in a solid Class 30 cast iron housing with a standard painted finish.

It carries a genuine SKF or Timken spherical roller insert in a solid cast iron housing with an integrated center support, so it gives spherical-roller misalignment and expansion capability in a Type E footprint. ME2000 housings are made in the USA, and the units are assembled here.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The insert accepts up to 1.5° of angular misalignment. Set screws torque to 1,325 in-lbs. The grease fitting is 1/8-27 NPT.

Mounting dimensions

  • Shipping weight: 87 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Non-Expansion. This position holds the shaft axially. Use one non-expansion bearing per shaft to locate it lengthwise. The matching expansion unit for this shaft size is 29111110.
  • Standard Triple Lip Contact Seal. Three lips in series for demanding contamination exclusion, at the cost of more running friction and heat.
  • Single Collar. One locking collar secures the insert to the shaft. Standard for unidirectional rotation and steady loads.
  • Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

The same size is also built as 29211110G (garter seals), 29211110DG (double collar, garter seals).

Replacement parts

The bearing insert is SLAA22-110.

Applications

ME2000 units are specified where a Type E footprint needs more misalignment or expansion capability. Moline Bearing Company lists conveying, screening, air handling, laundries, food processing, and paper and forestry among the industries that run them. It is dimensionally interchangeable with competitive spherical roller bearing units in Type E dimensions, including Moline's Split E1000 and ME3000 lines.