Moline Bearing
40MM ME2000 4-BOLT FLANGE NON-EXPANSION WITH GARTER SEALS
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
ME2000·4-Bolt Flange

40MM ME2000 4-BOLT FLANGE NON-EXPANSION WITH GARTER SEALS

29211040G

The 40 mm ME2000 4-Bolt Flange Non-Expansion Bearing with Garter Seals is Moline Bearing Company part 29211040G: a mounted spherical roller bearing with Type E dimensions with a spring loaded garter seal and a single collar set screw locking insert in a painted solid Class 30 cast iron housing. Dynamic load rating 17,300 lbf, maximum speed 1,600 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
29211040G
Series
ME2000
Housing Type
4-Bolt Flange
Shaft Size
40mm (1.5748″ / 40 mm)
Expansion / Non-Expansion
Non-Expansion
Weight
11.3 lb
Insert Number
SLA09-040
PDF Catalog
19800 lbf
17300 lbf
1/8-27 NPT
290 in-lbs
2100 lbf
1.5
0° - 250°
1600
ME2000 4-Bolt Flange dimensional drawing
AHousing Height Above Mounting Surface3 9⁄16
BHousing Base Length5 3⁄8
COverall Housing Height2 31⁄32
DBolt Hole Center to Center4 1⁄8
FBolt Diameter [Nominal]1⁄2
HHousing Base Height1 3⁄16
JUpper Housing Diameter4 1⁄4
LDrive Collar Outside Diameter [OD]2 5⁄8
NLength Through Bore - Single Collar2 7⁄8
NdLength Through Bore - Double Collarn/a
—Housing Base Width5 3⁄8

Product Variants

40MM ME2000 4-BOLT FLANGE NON-EXPANSION WITH LABYRINTH SEALS
40MM ME2000 4-BOLT FLANGE NON-EXPANSION WITH LABYRINTH SEALS
29211040L
40mm
40MM ME2000 4-BOLT FLANGE NON-EXPANSION DOUBLE COLLAR WITH GARTER SEALS
40MM ME2000 4-BOLT FLANGE NON-EXPANSION DOUBLE COLLAR WITH GARTER SEALS
29211040DG
40mm
40MM ME2000 4-BOLT FLANGE NON-EXPANSION
40MM ME2000 4-BOLT FLANGE NON-EXPANSION
29211040
40mm

40MM ME2000 4-BOLT FLANGE NON-EXPANSION WITH GARTER SEALS

The 40 mm ME2000 4-Bolt Flange Non-Expansion Bearing with Garter Seals is Moline Bearing Company part 29211040G: a mounted spherical roller bearing with Type E dimensions in the non-expansion position. It is fitted with a spring loaded garter seal and a single collar, set screw locking insert, in a solid Class 30 cast iron housing with a standard painted finish.

It carries a genuine SKF or Timken spherical roller insert in a solid cast iron housing with an integrated center support, so it gives spherical-roller misalignment and expansion capability in a Type E footprint. ME2000 housings are made in the USA, and the units are assembled here.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The dynamic load rating is 17,300 lbf and the static load rating is 19,800 lbf. Maximum speed is 1,600 rpm with the spring loaded garter seal fitted, and the seal is rated for 0° to 250°F. The insert accepts up to 1.5° of angular misalignment. Set screws torque to 290 in-lbs, and the locking system holds 2,100 lbf of radial load before the insert slips on the shaft. The grease fitting is 1/8-27 NPT.

Mounting dimensions

  • Bolt hole centers: 4 1⁄8 in
  • Bolt size: 1⁄2 in
  • Flange: 5 3⁄8 × 5 3⁄8 in
  • Height above mounting surface: 3 9⁄16 in
  • Length through bore: 2 7⁄8 in
  • Shipping weight: 11.3 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Non-Expansion. This position holds the shaft axially. Use one non-expansion bearing per shaft to locate it lengthwise. The matching expansion unit for this shaft size is 29111040G.
  • Spring Loaded Garter Seal. A contact seal with a garter spring keeping constant lip pressure on the shaft, holding its seal as the lip wears.
  • Single Collar. One locking collar secures the insert to the shaft. Standard for unidirectional rotation and steady loads.
  • Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

The same size is also built as 29211040 (triple-lip contact seals), 29211040L (labyrinth seals).

Replacement parts

The bearing insert is SLA09-040.

Applications

ME2000 units are specified where a Type E footprint needs more misalignment or expansion capability. Moline Bearing Company lists conveying, screening, air handling, laundries, food processing, and paper and forestry among the industries that run them. It is dimensionally interchangeable with competitive spherical roller bearing units in Type E dimensions, including Moline's Split E1000 and ME3000 lines.