Moline Bearing
1-15/16 M3000 2-BOLT PILLOW BLOCK NON-EXPANSION
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
M3000·2-Bolt Pillow Block

1-15/16 M3000 2-BOLT PILLOW BLOCK NON-EXPANSION

19721115

The 1 15⁄16" M3000 2-Bolt Pillow Block Non-Expansion Bearing is Moline Bearing Company part 19721115: an Even-Lok™ mounted spherical roller bearing with a standard double lip contact seal and a single collar Even-Lok insert in a painted solid Class 30 cast iron housing. Dynamic load rating 21,700 lbf, maximum speed 3,300 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
19721115
Series
M3000
Housing Type
2-Bolt Pillow Block
Shaft Size
1 15⁄16" (1.9375″ / 49.21 mm)
Expansion / Non-Expansion
Non-Expansion
Weight
9.1 lb
Insert Number
ABSY 22210-115
Housing Number
11221115
Download CADPDF Catalog
Static Load
22500 lbf
Dynamic Load
21700 lbf
Grease Fitting Size
1/8-27 NPT
Set Screw Torque
290 in-lbs
Open End Cap Part #
18621115
Closed End Cap Part #
18620115
Angular Misalignment (Degrees)
1.5
Product Family
Mounted Roller Bearing
Rolling Element
Spherical Roller
Housing Construction
Solid
Insert Material
Steel
Locking Style
Even-Lok
Lubrication Type
Lithium Complex Grease
Housing Material
Class 30 Cast Iron
Seal Type
Standard Double Lip Contact Seal
Seal Type Material
Nitrile
Seal Type Operating Range (F)
0° - 250°
Seal Type Maximum Speed (RPM)
3300
Housing Coating
Standard Painted
Collar Type
Single Collar
M3000 2-Bolt Pillow Block dimensional drawing
ALength Through Bore2 9⁄16
BHousing Base Length8 3⁄8
CHousing Base Width2 3⁄16
DBolt Hole Center to Center6 1⁄4
Min DBolt Hole Center to Center Minimum5 15⁄16
Max DBolt Hole Center to Center Maximum6 9⁄16
FBolt Diameter [Nominal]5⁄8
GBolt Hole Slot Length1
HHousing Base Height1 3⁄8
JOverall Housing Height4 9⁄16
MBase to Center Height2 1⁄4

Product Variants

1-15/16 M3000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH LABYRINTH SEALS
1-15/16 M3000 2-BOLT PILLOW BLOCK NON-EXPANSION WITH LABYRINTH SEALS
19721115L
1 15⁄16"

1-15/16 M3000 2-BOLT PILLOW BLOCK NON-EXPANSION

The 1 15⁄16" M3000 2-Bolt Pillow Block Non-Expansion Bearing is Moline Bearing Company part 19721115: an Even-Lok™ mounted spherical roller bearing in the non-expansion position. It is fitted with a standard double lip contact seal and a single collar, Even-Lok insert, in a solid Class 30 cast iron housing with a standard painted finish.

It carries a genuine SKF® Explorer spherical roller insert and locks to the shaft with Moline's Even-Lok™ concentric system, which grips nearly 360° of the shaft instead of at set-screw points, reducing fretting and slippage. A Hex-L key for mounting and dismounting ships with it. M3000 housings are made in the USA, and the units are assembled here.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The dynamic load rating is 21,700 lbf and the static load rating is 22,500 lbf. Maximum speed is 3,300 rpm with the standard double lip contact seal fitted, and the seal is rated for 0° to 250°F. The insert accepts up to 1.5° of angular misalignment. Set screws torque to 290 in-lbs. The grease fitting is 1/8-27 NPT.

Mounting dimensions

  • Base to center height: 2 1⁄4 in
  • Bolt hole centers: 6 1⁄4 in (slots allow 5 15⁄16 to 6 9⁄16 in), for 5⁄8 in bolts
  • Housing base: 8 3⁄8 × 2 3⁄16 in
  • Overall height: 4 9⁄16 in
  • Length through bore: 2 9⁄16 in
  • Shipping weight: 9.1 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Non-Expansion. This position holds the shaft axially. Use one non-expansion bearing per shaft to locate it lengthwise. The matching expansion unit for this shaft size is 19621115.
  • Standard Double Lip Contact Seal. Two lips in series, so the second continues to seal if the first is compromised. A step up in dirty conditions.
  • Single Collar. One locking collar secures the insert to the shaft. Standard for unidirectional rotation and steady loads.
  • Even-Lok. Moline's concentric locking system, which clamps the insert evenly around the shaft rather than at set-screw points. Improves concentricity and holding power versus set screws.

The same size is also built as 19721115L (labyrinth seals).

Replacement parts

The bearing insert is ABSY 22210-115, and the housing on its own is Moline Bearing Company part 11221115. Open end cap 18621115 and closed end cap 18620115 fit this housing.

Applications

M3000 units are for drives that need expansion and misalignment capability, or where vibration, slippage or fretting corrosion are present. Moline Bearing Company lists conveying, screening, air handling, industrial laundries and high-speed fans among the industries that run them. It is dimensionally interchangeable with comparable spherical roller bearing units, including Moline's M2000 line.