3-1/2 SPLIT E1000 CARTRIDGE
The 3 1⁄2" Split E1000 Cartridge Bearing is Moline Bearing Company part 19373308: a tapered roller bearing cartridge. It is fitted with a standard V-Guard contact seal and a double collar, set screw locking insert.
It is the replaceable solid cartridge from Moline's Split E1000 units: a genuine Timken® Enhanced DEE tapered roller insert, case-hardened and made from vacuum-degassed steel, in its own cartridge, so a worn bearing is swapped without removing the split housing from the shaft. Split E1000 units are made, machined and assembled in the USA.
It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.
Ratings
Maximum speed is 1,640 rpm with the standard V-Guard contact seal fitted, and the seal is rated for 0° to 250°F.
Mounting dimensions
- Cartridge width: 3.5 in
- Ridge diameter: 6.594 in
- Ridge width: 1.125 in
- Length through bore: 5 in
- Shipping weight: 30 lb
The full dimension table and the datasheet drawing are above.
This configuration
- Standard V-Guard Contact Seal. Moline's standard contact seal, with a lip riding on the insert to exclude contamination.
- Double Collar. Two locking collars share the clamping load, improving holding power under reversing rotation or shock.
- Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.
The same size is also built as 19373308L (labyrinth seals).
Replacement parts
The bearing insert is NPE42350DEE-401C4.
Applications
It fits Moline's Split E1000 split housings for a 3 1⁄2" shaft. The split housing is for shafts that cannot be dismantled to feed a solid bearing on, in the same high radial and thrust load service as Type E: conveying, screening, cranes, mining, forestry, oil, gas, power generation and aggregate. It is dimensionally interchangeable with comparable Type E units, including Moline's Type E, ME2000 and ME3000 lines.