Moline Bearing
2-7/16 SPLIT E1000 CARTRIDGE SINGLE COLLAR
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
Split E1000·Cartridge

2-7/16 SPLIT E1000 CARTRIDGE SINGLE COLLAR

19373207A

The 2 7⁄16" Split E1000 Cartridge Bearing with Single Collar Insert is Moline Bearing Company part 19373207A: a tapered roller bearing cartridge with a standard V-Guard contact seal and a single collar set screw locking insert. Maximum speed 2,100 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Made, machined & assembled in the USA.
  • Shipped Ready to Install with Premium Timken inserts.
  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
19373207A
Series
Split E1000
Housing Type
Cartridge
Shaft Size
2 7⁄16" (2.4375″ / 61.91 mm)
Weight
11 lb
Insert Number
NPE39243DEE-401C4
PDF Catalog
Product Family
Mounted Roller Bearing
Rolling Element
Tapered Roller
Insert Material
Steel
Locking Style
Set Screw Locking
Lubrication Type
Lithium Complex Grease
Housing Material
Steel
Seal Type
Standard V-Guard Contact Seal
Seal Type Material
Nitrile, Teflon and Steel
Seal Type Operating Range (F)
0° - 250°
Seal Type Maximum Speed (RPM)
2100
Collar Type
Single Collar
Length Through Bore (A)
4
Width (B)
2.55
Cartridge Ridge Width (C)
0.85
Cartridge Ridge Diameter (K)
4.781
Drive Collar Outside Diameter [OD] (L)
4

Product Variants

2-7/16 SPLIT E1000 CARTRIDGE
2-7/16 SPLIT E1000 CARTRIDGE
19373207
2 7⁄16"

2-7/16 SPLIT E1000 CARTRIDGE SINGLE COLLAR

The 2 7⁄16" Split E1000 Cartridge Bearing with Single Collar Insert is Moline Bearing Company part 19373207A: a tapered roller bearing cartridge. It is fitted with a standard V-Guard contact seal and a single collar, set screw locking insert.

It is the replaceable solid cartridge from Moline's Split E1000 units: a genuine Timken® Enhanced DEE tapered roller insert, case-hardened and made from vacuum-degassed steel, in its own cartridge, so a worn bearing is swapped without removing the split housing from the shaft. Split E1000 units are made, machined and assembled in the USA.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

Maximum speed is 2,100 rpm with the standard V-Guard contact seal fitted, and the seal is rated for 0° to 250°F.

Mounting dimensions

  • Cartridge width: 2.55 in
  • Ridge diameter: 4.781 in
  • Ridge width: 0.85 in
  • Length through bore: 4 in
  • Shipping weight: 11 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Standard V-Guard Contact Seal. Moline's standard contact seal, with a lip riding on the insert to exclude contamination.
  • Single Collar. One locking collar secures the insert to the shaft. Standard for unidirectional rotation and steady loads.
  • Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

The same size is also built as 19373207 (double collar).

Replacement parts

The bearing insert is NPE39243DEE-401C4.

Applications

It fits Moline's Split E1000 split housings for a 2 7⁄16" shaft. The split housing is for shafts that cannot be dismantled to feed a solid bearing on, in the same high radial and thrust load service as Type E: conveying, screening, cranes, mining, forestry, oil, gas, power generation and aggregate. It is dimensionally interchangeable with comparable Type E units, including Moline's Type E, ME2000 and ME3000 lines.