Moline Bearing
5-15/16 TYPE E 4-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
Type E·4-Bolt Pillow Block

5-15/16 TYPE E 4-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT

19341515A

The 5 15⁄16" Type E 4-Bolt Pillow Block Non-Expansion Bearing with Single Collar Insert is Moline Bearing Company part 19341515A: a mounted tapered roller bearing with a standard V-Guard contact seal and a single collar set screw locking insert in a painted solid Class 30 cast iron housing. Dynamic load rating 41,500 lbf, maximum speed 915 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
19341515A
Series
Type E
Housing Type
4-Bolt Pillow Block
Shaft Size
5 15⁄16" (5.9375″ / 150.81 mm)
Expansion / Non-Expansion
Non-Expansion
Weight
243 lb
Insert Number
JM736149
PDF Catalog
Static Load
354000 lbf
Dynamic Load
41500 lbf
Grease Fitting Size
1/8-27 NPT
Set Screw Torque
2150 in-lbs
Radial Slip Resistance
42400 lbf
Open End Cap Part #
18601515
Closed End Cap Part #
18600515
Angular Misalignment (Degrees)
0.05
Product Family
Mounted Roller Bearing
Rolling Element
Tapered Roller
Housing Construction
Solid
Insert Material
Steel
Locking Style
Set Screw Locking
Lubrication Type
Lithium Complex Grease
Housing Material
Class 30 Cast Iron
Seal Type
Standard V-Guard Contact Seal
Seal Type Material
Nitrile, Teflon and Steel
Seal Type Operating Range (F)
0° - 250°
Seal Type Maximum Speed (RPM)
915
Housing Coating
Standard Painted
Collar Type
Single Collar
Type E 4-Bolt Pillow Block dimensional drawing
ALength Through Bore9
BHousing Base Length22
CHousing Base Width6 1⁄4
DBolt Hole Center to Center18 1⁄4
Min DBolt Hole Center to Center Minimum17 3⁄8
Max DBolt Hole Center to Center Maximum19 1⁄8
EBolt Spacing [Width]3 3⁄4
FBolt Diameter [Nominal]1
GBolt Hole Slot Length2
HHousing Base Height3 1⁄4
JOverall Housing Height13 3⁄16
LDrive Collar Outside Diameter [OD]9 3⁄8
MBase to Center Height6 11⁄16

Product Variants

5-15/16 TYPE E 4-BOLT PILLOW BLOCK
5-15/16 TYPE E 4-BOLT PILLOW BLOCK
19341515
5 15⁄16"

5-15/16 TYPE E 4-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT

The 5 15⁄16" Type E 4-Bolt Pillow Block Non-Expansion Bearing with Single Collar Insert is Moline Bearing Company part 19341515A: a mounted tapered roller bearing in the non-expansion position. It is fitted with a standard V-Guard contact seal and a single collar, set screw locking insert, in a solid Class 30 cast iron housing with a standard painted finish.

It carries a genuine Timken® Enhanced DEE tapered roller insert: case-hardened rollers and races made from vacuum-degassed steel, with a double-extended inner race, rated for high radial and thrust loads and slight angular misalignment. The housing is machined to close tolerances, and the unit is made, machined and assembled in the USA.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The dynamic load rating is 41,500 lbf and the static load rating is 354,000 lbf. Maximum speed is 915 rpm with the standard V-Guard contact seal fitted, and the seal is rated for 0° to 250°F. The insert accepts up to 0.05° of angular misalignment. Set screws torque to 2,150 in-lbs, and the locking system holds 42,400 lbf of radial load before the insert slips on the shaft. The grease fitting is 1/8-27 NPT.

Mounting dimensions

  • Base to center height: 6 11⁄16 in
  • Bolt hole centers: 18 1⁄4 in (slots allow 17 3⁄8 to 19 1⁄8 in), for 1 in bolts
  • Bolt spacing across: 3 3⁄4 in
  • Housing base: 22 × 6 1⁄4 in
  • Overall height: 13 3⁄16 in
  • Length through bore: 9 in
  • Shipping weight: 243 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Non-Expansion. This position holds the shaft axially. Use one non-expansion bearing per shaft to locate it lengthwise.
  • Standard V-Guard Contact Seal. Moline's standard contact seal, with a lip riding on the insert to exclude contamination.
  • Single Collar. One locking collar secures the insert to the shaft. Standard for unidirectional rotation and steady loads.
  • Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

The same size is also built as 19341515 (double collar).

Replacement parts

The bearing insert is JM736149. Open end cap 18601515 and closed end cap 18600515 fit this housing.

Applications

Type E units are specified where radial loads, thrust loads or both are high and misalignment is minimal. Moline Bearing Company lists conveying, screening, cranes, mining, forestry, oil, gas, power generation and aggregate among the industries that run them. It is dimensionally interchangeable with comparable Type E units, including Moline's Split E1000, ME2000 and ME3000 lines.