Moline Bearing
170MM TYPE E 4-BOLT PILLOW BLOCK
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
Type E·4-Bolt Pillow Block

170MM TYPE E 4-BOLT PILLOW BLOCK

19341170

The 170 mm Type E 4-Bolt Pillow Block Non-Expansion Bearing is Moline Bearing Company part 19341170: a mounted tapered roller bearing with a standard V-Guard contact seal and a double collar set screw locking insert in a painted solid Class 30 cast iron housing. Dynamic load rating 70,500 lbf, maximum speed 750 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
19341170
Series
Type E
Housing Type
4-Bolt Pillow Block
Shaft Size
170mm (6.6929″ / 170 mm)
Expansion / Non-Expansion
Non-Expansion
Weight
340 lb
Insert Number
JHM840449-N0000
Housing Number
11401615
Download CADPDF Catalog
574000 lbf
70500 lbf
1/8-27 NPT
2150 in-lbs
72000 lbf
-
18600615
0.05
0° - 250°
750
Type E 4-Bolt Pillow Block dimensional drawing
ALength Through Bore10 1⁄2
BHousing Base Length26
CHousing Base Width7 1⁄8
DBolt Hole Center to Center22 1⁄4
Min DBolt Hole Center to Center Minimum21 1⁄4
Max DBolt Hole Center to Center Maximum23 1⁄4
EBolt Spacing [Width]4 5⁄8
FBolt Diameter [Nominal]1
GBolt Hole Slot Length2 1⁄8
HHousing Base Height3 11⁄16
JOverall Housing Height15
LDrive Collar Outside Diameter [OD]10 1⁄2
MBase to Center Height7 1⁄2

Product Variants

170MM TYPE E 4-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT
170MM TYPE E 4-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT
19341170A
170mm

170MM TYPE E 4-BOLT PILLOW BLOCK

The 170 mm Type E 4-Bolt Pillow Block Non-Expansion Bearing is Moline Bearing Company part 19341170: a mounted tapered roller bearing in the non-expansion position. It is fitted with a standard V-Guard contact seal and a double collar, set screw locking insert, in a solid Class 30 cast iron housing with a standard painted finish.

It carries a genuine Timken® Enhanced DEE tapered roller insert: case-hardened rollers and races made from vacuum-degassed steel, with a double-extended inner race, rated for high radial and thrust loads and slight angular misalignment. The housing is machined to close tolerances, and the unit is made, machined and assembled in the USA.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The dynamic load rating is 70,500 lbf and the static load rating is 574,000 lbf. Maximum speed is 750 rpm with the standard V-Guard contact seal fitted, and the seal is rated for 0° to 250°F. The insert accepts up to 0.05° of angular misalignment. Set screws torque to 2,150 in-lbs, and the locking system holds 72,000 lbf of radial load before the insert slips on the shaft. The grease fitting is 1/8-27 NPT.

Mounting dimensions

  • Base to center height: 7 1⁄2 in
  • Bolt hole centers: 22 1⁄4 in (slots allow 21 1⁄4 to 23 1⁄4 in), for 1 in bolts
  • Bolt spacing across: 4 5⁄8 in
  • Housing base: 26 × 7 1⁄8 in
  • Overall height: 15 in
  • Length through bore: 10 1⁄2 in
  • Shipping weight: 340 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Non-Expansion. This position holds the shaft axially. Use one non-expansion bearing per shaft to locate it lengthwise.
  • Standard V-Guard Contact Seal. Moline's standard contact seal, with a lip riding on the insert to exclude contamination.
  • Double Collar. Two locking collars share the clamping load, improving holding power under reversing rotation or shock.
  • Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

Replacement parts

The bearing insert is JHM840449-N0000, and the housing on its own is Moline Bearing Company part 11401615. Closed end cap 18600615 fits this housing.

Applications

Type E units are specified where radial loads, thrust loads or both are high and misalignment is minimal. Moline Bearing Company lists conveying, screening, cranes, mining, forestry, oil, gas, power generation and aggregate among the industries that run them. It is dimensionally interchangeable with comparable Type E units, including Moline's Split E1000, ME2000 and ME3000 lines.