Moline Bearing
85MM TYPE E 2-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
Type E·2-Bolt Pillow Block

85MM TYPE E 2-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT

19321085A

The 85 mm Type E 2-Bolt Pillow Block Non-Expansion Bearing with Single Collar Insert is Moline Bearing Company part 19321085A: a mounted tapered roller bearing with a standard V-Guard contact seal and a single collar set screw locking insert in a painted solid Class 30 cast iron housing. Dynamic load rating 19,600 lbf, maximum speed 1,640 rpm. Made in the USA, shipped assembled, sealed and lubricated, ready to install.

  • Made, machined & assembled in the USA.
  • Shipped Ready to Install with Premium Timken inserts.
  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
19321085A
Series
Type E
Housing Type
2-Bolt Pillow Block
Shaft Size
85 mm (3.3464″ / 85 mm)
Expansion / Non-Expansion
Non-Expansion
Weight
44 lb
Insert Number
42334DE | NPE42334DEE-401C4
Insert Supplier Part Number
15200085 | 15205085
PDF Catalog
Static Load
108000 lbf
Dynamic Load
19600 lbf
Grease Fitting Size
1/8-27 NPT
Set Screw Torque
620 in-lbs
Radial Slip Resistance
16000 lbf
Open End Cap Part #
-
Closed End Cap Part #
18620307
Angular Misalignment (Degrees)
0.05
Product Family
Mounted Roller Bearing
Rolling Element
Tapered Roller
Housing Construction
Solid
Insert Material
Steel
Locking Style
Set Screw Locking
Lubrication Type
Lithium Complex Grease
Housing Material
Class 30 Cast Iron
Seal Type
Standard V-Guard Contact Seal
Seal Type Material
Nitrile
Seal Type Operating Range (F)
0° - 250°
Seal Type Maximum Speed (RPM)
1640
Housing Coating
Standard Painted
Collar Type
Single Collar
Type E 2-Bolt Pillow Block dimensional drawing
ALength Through Bore5
BHousing Base Length14
CHousing Base Width3 5⁄8
DBolt Hole Center to Center10 5⁄8
Min DBolt Hole Center to Center Minimum9 3⁄4
Max DBolt Hole Center to Center Maximum11 1⁄2
FBolt Diameter [Nominal]7⁄8
GBolt Hole Slot Length1 7⁄8
HHousing Base Height2 1⁄4
JOverall Housing Height7 1⁄2
LDrive Collar Outside Diameter [OD]5 5⁄16
MBase to Center Height3 3⁄4

Product Variants

85MM TYPE E 2-BOLT PILLOW BLOCK WITH LABYRINTH SEALS
85MM TYPE E 2-BOLT PILLOW BLOCK WITH LABYRINTH SEALS
19321085L
85 mm
85MM TYPE E 2-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT & LABYRINTH SEALS
85MM TYPE E 2-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT & LABYRINTH SEALS
19321085AL
85 mm
85MM TYPE E 2-BOLT PILLOW BLOCK
85MM TYPE E 2-BOLT PILLOW BLOCK
19321085
85 mm

85MM TYPE E 2-BOLT PILLOW BLOCK WITH SINGLE COLLAR INSERT

The 85 mm Type E 2-Bolt Pillow Block Non-Expansion Bearing with Single Collar Insert is Moline Bearing Company part 19321085A: a mounted tapered roller bearing in the non-expansion position. It is fitted with a standard V-Guard contact seal and a single collar, set screw locking insert, in a solid Class 30 cast iron housing with a standard painted finish.

It carries a genuine Timken® Enhanced DEE tapered roller insert: case-hardened rollers and races made from vacuum-degassed steel, with a double-extended inner race, rated for high radial and thrust loads and slight angular misalignment. The housing is machined to close tolerances, and the unit is made, machined and assembled in the USA.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Ratings

The dynamic load rating is 19,600 lbf and the static load rating is 108,000 lbf. Maximum speed is 1,640 rpm with the standard V-Guard contact seal fitted, and the seal is rated for 0° to 250°F. The insert accepts up to 0.05° of angular misalignment. Set screws torque to 620 in-lbs, and the locking system holds 16,000 lbf of radial load before the insert slips on the shaft. The grease fitting is 1/8-27 NPT.

Mounting dimensions

  • Base to center height: 3 3⁄4 in
  • Bolt hole centers: 10 5⁄8 in (slots allow 9 3⁄4 to 11 1⁄2 in), for 7⁄8 in bolts
  • Housing base: 14 × 3 5⁄8 in
  • Overall height: 7 1⁄2 in
  • Length through bore: 5 in
  • Shipping weight: 44 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Non-Expansion. This position holds the shaft axially. Use one non-expansion bearing per shaft to locate it lengthwise.
  • Standard V-Guard Contact Seal. Moline's standard contact seal, with a lip riding on the insert to exclude contamination.
  • Single Collar. One locking collar secures the insert to the shaft. Standard for unidirectional rotation and steady loads.
  • Set Screw Locking. Set screws in the collar bite into the shaft. Simple and widely used; best where rotation is in one direction.

The same size is also built as 19321085AL (labyrinth seals), 19321085L (double collar, labyrinth seals), 19321085 (double collar).

Replacement parts

The bearing insert is 42334DE or NPE42334DEE-401C4. Closed end cap 18620307 fits this housing.

Applications

Type E units are specified where radial loads, thrust loads or both are high and misalignment is minimal. Moline Bearing Company lists conveying, screening, cranes, mining, forestry, oil, gas, power generation and aggregate among the industries that run them. It is dimensionally interchangeable with comparable Type E units, including Moline's Split E1000, ME2000 and ME3000 lines.