Moline Bearing
HC 210-32, 2 BALL BEARING ECCENTRIC INSERT
Pricing and availability are confirmed by our sales team after a quote request is submitted. Add this item to your quote and we'll respond with lead time and pricing within one business day.
Normal Duty HC

HC 210-32, 2 BALL BEARING ECCENTRIC INSERT

15500200-10

The 2" Normal Duty HC Bearing is Moline Bearing Company part 15500200-10: a mounted ball bearing unit with a single collar eccentric screw locking insert in a steel housing. Manufactured overseas for Moline Bearing Company, shipped assembled, sealed and lubricated, ready to install.

  • Manufactured to meet quality standards set by the industry with a single row deep groove ball bearing and cast iron housing.
  • All Ball Bearings are available as inserts, housings, & complete units.
  • Custom Colors, Powder Coating, Stainless Steel Coating, Nickel Plating, Epoxy Coatings, and Teflon Coatings can be quoted upon request.
Part Number
15500200-10
Series
Normal Duty HC
Shaft Size
2" (2″ / 50.8 mm)
Weight
2.05 lb
Insert Number
HC 210-32
Download CADPDF Catalog
Unit Width (Bi)
2.468
Cartridge Ridge Width (Be)
0.905
3.5433
5⁄16–24
Locking Side to Center of Set Screw (g)
0.255
Drive Collar Width (H)
0.72
Drive Collar Outside to Locking Side of Shaft (i)
0.531
2.752
Locking Side to Center of Rolling Element (m)
0.968
Non-Locking Side to Center of Rolling Element (n)
0.968
2.468

Similar Products

HC 211-32, 2 BALL BEARING ECCENTRIC INSERT
HC 211-32, 2 BALL BEARING ECCENTRIC INSERT
15500200
2"
HC 210-31, 1-15/16 BALL BEARING ECCENTRIC INSERT
HC 210-31, 1-15/16 BALL BEARING ECCENTRIC INSERT
15500115
1 15⁄16"
HC 210-30, 1-7/8 BALL BEARING ECCENTRIC INSERT
HC 210-30, 1-7/8 BALL BEARING ECCENTRIC INSERT
15500114
1 7⁄8"
HC 211-34, 2-1/8 BALL BEARING ECCENTRIC INSERT
HC 211-34, 2-1/8 BALL BEARING ECCENTRIC INSERT
15500202
2 1⁄8"
HC 211-35, 2-3/16 BALL BEARING ECCENTRIC INSERT
HC 211-35, 2-3/16 BALL BEARING ECCENTRIC INSERT
15500203
2 3⁄16"
HC 209-28, 1-3/4 BALL BEARING ECCENTRIC INSERT
HC 209-28, 1-3/4 BALL BEARING ECCENTRIC INSERT
15500112
1 3⁄4"

HC 210-32, 2 BALL BEARING ECCENTRIC INSERT

The 2" Normal Duty HC Bearing is Moline Bearing Company part 15500200-10: a mounted ball bearing unit. It has a single collar, eccentric screw locking insert, in a steel housing.

The insert is a single-row deep groove ball bearing with a spherical ground outside diameter that seats in a matching spherical seat in the housing, so the unit self-aligns at mounting. The eccentric locking collar gives a larger shaft contact area than set screws and is hard to loosen in normal use. These units are manufactured overseas for Moline Bearing Company to the quality standard set by the bearing industry, at a lower price.

It ships assembled, adjusted, sealed and pre-lubricated with lithium complex grease, so it mounts straight from the box with no adjustment or cleaning.

Mounting dimensions

  • Length through bore: 2.468 in
  • Shipping weight: 2.05 lb

The full dimension table and the datasheet drawing are above.

This configuration

  • Single Collar. One locking collar secures the insert to the shaft. Standard for unidirectional rotation and steady loads.
  • Eccentric Screw Locking. An offset collar that cams against the shaft as it is rotated, then locks. Holds well in one direction of rotation and should be oriented accordingly.

Replacement parts

The bearing insert is HC 210-32.

Applications

Normal Duty ball bearing units go into lighter-load, higher-speed drives: conveying, screening, material handling, and food and beverage equipment. It is dimensionally interchangeable with industry-standard HC-series units of the same size.